Home > PTFE Division > MS PFA/FEP Lined UnEqual Tee

MS PFA/FEP Lined UnEqual Tee

HOUSING MATERIAL :
  • Flanges : IS 2062 Plates / SS 304 / SS 316
  • Fabricated made from: Pipe as per ASTM A 106 Gr.B / SS 304 / SS 316
  • Casting Tee : D.I Casting ASTM A 395 Gr. 60-40-18
  • Lining : PFA/ FEP / PP
OPTIONS :
  • Flange : Rotating, Fixed On/Off center DIN PN 10/16, BS 10
  • Extras : Earthing Studs / Lugs
  • Geometry : Non Standard Dimensions
DESIGN SPECIFICATION :
  • Flange : As per ANSI B 16.5
  • Face to Face : As per ANSI B 16.5 # 150
  • Lining Thickness : 3 to 5 mm

    • Other Flanges Drilling like DIN PN 2632 / 2633, BS 10 Table D, E or F are also available on request Sizes above 6″ are fabricated from pipe to center dimensions

TEST & INSPECTION DATA :

Resins are conforming to the requirements of ASTM F 1545-97 (2003)

  • Hydraulic Test : 28 Kg / Cm2 After Lining
  • Spark Test : 15 KV D.C After Lining

Dimensions Table

NOMINAL BORE BODY (NB1) BRANCH (NB2) CENTER LINE TO FACE (F)
NB1 NB2 FLANGE OD B1 RAISED FACE R/F1 FLANGE OD B2 RAISED FACE R/F2
(MM) (INCHES) (MM) (INCHES) (MM) (MM) (MM) (MM) (MM)
40 1.5 25 1 127.0 73 108.0 51 102
50 2 25 1 152.4 92 108.0 51 114
50 2 40 1.5 152.4 92 127.0 73 114
80 3 25 1 190.5 127 108.0 51 140
80 3 40 1.5 190.5 127 127.0 73 140
80 3 50 2 190.5 127 152.4 92 140
100 4 25 1 228.6 157 108.0 51 165
100 4 40 1.5 228.6 157 127.0 73 165
100 4 50 2 228.6 157 152.4 92 165
100 4 80 3 228.6 157 190.5 127 165
150 6 25 1 279.4 216 108.0 51 203
150 6 40 1.5 279.4 216 127.0 73 203
150 6 50 2 279.4 216 152.4 92 203
150 6 80 3 279.4 216 190.5 127 203
150 6 100 4 279.4 216 228.6 157 203
© 2024 ARYAN POLYMER LINING. ALL RIGHTS RESERVED | DESIGN BY IDEAL GROUPS