Home > PTFE Division > MS PFA/FEP Lined Con Reducer

MS PFA/FEP Lined Con Reducer

HOUSING MATERIAL :
  • Fabricated Flanges: Made from IS 2062 Plates/SS304/SS316
  • Concentric Reducer : ASTM A 234 Gr.WPB /SS304/SS316 - SCH 40
  • Casting : D.I Casting ASTM A 395 Gr. 60-40-18
  • Lining : FEP ASTM D 2116
OPTIONS :
  • Flange : Rotating DIN PN 10/16, BS10
  • Extras : Earthing Studs/Lugs
  • Material : Stainless Steel
  • Lining : PFA/HDPE/PP
  • Geometry : Non Standard Dimensions
DESIGN SPECIFICATION :
  • Flange : As per ANSI B 16.5
  • Face to Face : As per ANSI B 16.5 # 150
  • Lining Thickness : 3 to 5 mm

Other Flanges Drilling like DIN 2632/2633, BS 10 Table D, E or F are also available on request

TEST & INSPECTION DATA :

Resins are conforming to the requirements of ASTM F 1545-97 (2003)

  • Hydraulic Test : 20 Kg / Cm2 After Lining
  • Spark Test : 15 KV D.C After Lining

Dimensions Table

NOMINAL BORE ØA1 ØR/F 1 ØA2 ØR/F 2 FACE TO FACE - F
NB1 NB2
(MM) (MM) (INCHES) (MM) (MM) (MM) (MM)
40 25 127.0 73 108.0 51 114
50 25 152.4 92 108.0 51 127
50 40 152.4 92 127.0 73 127
80 25 190.5 127 108.0 51 152
80 40 190.5 127 127.0 73 152
80 50 190.5 127 152.4 92 152
100 25 228.6 157 108.0 51 178
100 40 228.6 157 127.0 73 178
100 50 228.6 157 152.4 92 178
100 80 228.6 157 190.5 127 178
150 50 279.4 216 152.4 92 229
150 80 279.4 216 190.5 127 229
150 100 279.4 216 228.6 158 229
200 100 342.9 270 228.6 158 279
200 150 342.9 270 279.4 216 279
© 2024 ARYAN POLYMER LINING. ALL RIGHTS RESERVED | DESIGN BY IDEAL GROUPS